Back to all

Service Center Standard and Procedures

November 3, 2019

All Missouri pilots have checklists for every aspect of flying. They always use their checklists even if they only have two steps on them. They do this simply because a checklist is a great way to not forget steps. It is also how they can assure a predictable outcome.

That is why Dexter automotive service centers including Charlie's Fast Lube Dexter have procedural standards for each service they perform. Charlie's Fast Lube Dexter technicians are trained step by step. And they perform the procedures step by step, the same way each time. By training to procedural standards, Missouri service centers can assure a quality outcome. The job is done right every time and Dexter customers leave happy with how their vehicle performs.

Each company trains its technicians to standards. The Missouri automotive industry as a whole is very committed to standards of excellence and encourages individual Missouri service center operators to apply them to every vehicle they service.

An example is how Charlie's Fast Lube Dexter grades problems and communicates their recommendations. If your service advisor tells you that a repair or replacement is required it must meet the following criteria:

The part no longer performs its intended purpose
The part does not meet a design specification
The part is missing

They may suggest repair or replacement:

If the part is close to the end of its useful life - just above discard specifications or likely to fail soon
To address a customer need or request - like for better ride or increased performance
To comply with maintenance recommended by the vehicle manufacturer
Based on the technician's informed experience

Here are some examples:

An exhaust pipe has rusted through and is leaking. Replacement is recommended because the part has failed. If the pipe were rusted, corroded or weak but not leaking, the technician may suggest it be replaced because it is near the end of its useful life and replacing it now may be more convenient for the customer.

Suppose a customer wants to improve his car's handling, but his shocks haven't failed. The may suggest replacement of the shocks to satisfy the customer's wishes.

Under these guidelines the Dexter car repair shop must refuse partial service of a required repair if the repair creates or continues an unsafe condition.

Let's say a customer has a cracked brake rotor. This is a dangerous condition that must be repaired. If the customer does not want to replace the rotor but instead just wants new brake pads installed, the shop must ethically refuse the partial repair. That can be an upsetting conversation, but understanding that Dexter service centers operate under service standards and procedures is comforting. You want your service to be done right and to have confidence in your technician's recommendations.

The Missouri automotive service industry and Charlie's Fast Lube Dexter want the best for you and for you to keep coming back.

Charlie's Fast Lube Dexter
414 N 1 Mile Rd.
Dexter, Missouri 63841
573-614-7886
https://charliesfastlubedexter.com

 

Need Service?

Request a Quote

More articles from Charlie's Fast Lube Dexter

Straight Ahead (Wheel Alignment)

December 15, 2024

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do. Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways. Your steering wheel may not be centered when ... More

Steer Me Right! (Failing Power Steering Hose)

December 8, 2024

Most drivers love how easy it is to turn their vehicles, and they have power steering to thank. Engineers have figured out a way to take some of your engine's power to help you turn. Without it, steering can be quite a chore. New power systems are electric, but there are still plenty of the old... More

Such a Little Part (Climate Control Resistor)

December 1, 2024

You expect your heater/air conditioner to work like it should. You have a control for temperature and one for fan speed. You even have a control for what vents the air comes out of. Don't be surprised one day if your blower fan develops a mind of its own and starts going crazy. Most of the ti... More