Back to all

Fuel Injection Basics for Dexter

December 12, 2021



All modern Dexter vehicles come with fuel injection systems, so it's a topic Dexter drivers need to know something about. The mighty fuel injector is a valve that delivers the gas or diesel fuel to the right place, in the right amount at the right timeto be mixed with air and burned in the engine.

So how many fuel injectors does your vehicle have? There's one for each cylinder. So four, six or eight for most folks in Dexter, Missouri. Some vehicles have 10 or 12 cylinders. The engine control computer makes adjustments to the fuel injector as it monitors the engine and other sensors. Fuel injectors are a pretty high-tech.

Charlie's Fast Lube Dexter can help Dexter drivers with a fuel injector cleaning service. What's the benefit? In order to work right, the fuel injectors have to deliver the fuel at a precise pressure at a very precise time. It's important that the fuel is sprayed in a particular pattern as determined by the engine design.

Over time, varnish can start to build up in the fuel injectors, effecting the pressure, pattern and timing of the fuel charge. The result is that the fuel doesn't get burned as efficiently as it could. That robs performance and hurts fuel economy.

What about dirty fuel? How does that affect the fuel injectors? The fuel injectors are the last stop in the fuel system. It starts at the fuel tank. Frankly, the best way to keep your fuel injectors working well is to use high quality fuel. It's tempting to shop for bargains in Dexter with fuel prices as high as they are, but major brands in the Dexter, Missouri, area have better detergents and additives and deliver consistent quality.

What about a good fuel filter? The fuel filter is component of the fuel system. Its job is to filter out the dirt and rust that collect in the fuel tank. If it's clogged up, the dirt will bypass the filter and head upstream to the fuel injectors.

It's important to replace the fuel filter when your manufacturer recommends it. That's part of a comprehensive fuel system cleaning.

There are different kinds of fuel injection systems. Port fuel injection systems, the kind most gasoline engines have, operate at 60 pounds per square inch. The injectors for the new gas direct injection engines Dexter drivers are starting to see require 10 to 30 times as much pressure. And some diesel engines for passenger vehicles have injectors that operate at 30,000 pounds or more per square inch. There's no room for dirt and gum in a precision part like that.

There are a lot of good products available in Dexter, Missouri, that can clean fuel injectors. They're best used to prevent fouling in the fuel injectors. Many can't clean a seriously gummed up injector – that requires a professional deep cleaning, like those we offer at Charlie's Fast Lube Dexter in Dexter. But putting the cleaner in the fuel tank after you've had Charlie's Fast Lube Dexter take a look at your fuel system will help keep it clean. Be sure to read the label for directions.

Give us a call if you think your vehicle may be ready for a fuel injector cleaning.

 

Charlie's Fast Lube Dexter
414 N 1 Mile Rd.
Dexter, Missouri 63841
573-614-7886
https://charliesfastlubedexter.com

 

Need Service?

Request a Quote

More articles from Charlie's Fast Lube Dexter

Straight Ahead (Wheel Alignment)

December 15, 2024

If every road was straight and smooth, we wouldn't have to worry much about wheel alignment. But they're not, so we do. Hitting potholes or driving on rough pavement can knock your vehicle out of alignment and you'll notice it in one of several ways. Your steering wheel may not be centered when ... More

Steer Me Right! (Failing Power Steering Hose)

December 8, 2024

Most drivers love how easy it is to turn their vehicles, and they have power steering to thank. Engineers have figured out a way to take some of your engine's power to help you turn. Without it, steering can be quite a chore. New power systems are electric, but there are still plenty of the old... More

Such a Little Part (Climate Control Resistor)

December 1, 2024

You expect your heater/air conditioner to work like it should. You have a control for temperature and one for fan speed. You even have a control for what vents the air comes out of. Don't be surprised one day if your blower fan develops a mind of its own and starts going crazy. Most of the ti... More